Get Estimate

 

Are you in search of tips on What Would Cause My Electric Water Heater to Stop Working??

Many contemporary residences make use of an electric hot water heater for their furnace, because of its convenience and also simplicity of use. However, similar to any other electric home appliances, problems may arise with its use, all of a sudden. It can be truly discouraging to get up to a cold shower as opposed to a warm one or having your bath with water that isn't warm adequate and even too warm. Whatever the case might be, water heater problems can be rather stressful. Fortunately, we have actually made a listing of possible remedies to your hot water heater problems. There are a number of factors that can create much of these troubles, maybe an issue with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, ensure you switch off the primary power supply for safety. Whatever the trouble is, getting it fixed ought to not posture way too much of a problem if you follow these actions:

 

Call A Specialist:

If after changing all malfunctioning parts as well as resetting your temperature level, the hot water heater still isn't working, you might require to speak to a professional plumber for a specialist point of view. The problem with your heater could be that the cold and hot taps have been changed or it might be undersized for the quantity of hot water required in your home. Whatever the instance might be, a specialist plumber would certainly assist solve the issue.

 

Examine Your Power Supply:

As basic as this might seem, it is extremely essential. Without sufficient power, your hot water heater will not work. So the first thing to do when your water instantly stops working is to verify that it isn't a power trouble. Check if the fuse is burnt out or the breaker stumbled. If the breaker is the problem, merely turn it on and off again. Change any kind of broken or worn-out fuse. Examine the appliance with power after these modifications to see if it's now working.

 

Inspect Your Thermostat:

If your water heater still isn't working or the water coming out isn't hot enough, you may need to inspect the temperature level setups on your upper thermostat. Guarantee the breaker is turned off prior to doing anything. Open up the gain access to panel as well as press the red switch for temperature level reset above the thermostat. This ought to assist heat up the water. Transform the breaker back on and also examine if the problem has been fixed.

 

Inspect the Burner in the Hot Water Heater:

If it's not a power trouble, after that try looking into your burner if it is still functioning. Test each of your heating elements to be sure the problem isn't with any of them. If any of them is defective, replace that component and afterwards examine whether the warm water is back on.

 

Verdict

Hot water heater troubles are not constantly significant. Much of them result from small problems like a blown fuse or worn-out heating element. Changing the malfunctioning parts need to suffice. Nonetheless, if you are still incapable to fix the issue, give a call to your nearby plumber to find to get it repaired.

 

What Would Cause My Electric Water Heater to Stop Working?

 

Your water heater is one of the most forgotten-about appliances in your home—until it quits working. Once you realize that there’s no hot water, the water heater jumps up to become the most noticeable appliance you have. No one in your family will be happy until you get the water heater fixed.

To fix an electric water heater as soon as possible, follow the troubleshooting advice discussed below.

 

Basic Water Heater Troubleshooting

 

Fortunately, you may be restore the hot water supply simply by resetting the house circuit breaker for the water heater. A tripped circuit breaker is one of the top causes of water heater failures. Shut the hot water heater breaker off then turn it back on. Give the water heater a half hour to heat up (if it’s working) and then check for hot water through one of your faucets.

If you get hot water after resetting the breaker, then the problem may be fixed if the breaker inadvertently tripped and it doesn’t continue tripping.

If the water heater breaker trips again, then you’ll likely need to have a service technician examine and repair the water heater. The service technician will check the circuit breaker and electrical supply wiring for the water heater. A short in the supply wiring or a bad circuit breaker could be causing the breaker to trip. An internal failure such as a broken heating element can also cause the breaker to continue tripping.

When resetting the water heater circuit breaker doesn’t work at all, then the water heater may be getting power while an internal water heater failure is causing the problem.

 

Conduct Advanced DIY Water Heater Troubleshooting

 

If the water heater doesn’t work after resetting the high-temperature limit switch, then you’ll need to either conduct some advanced water heater troubleshooting or have a service technician diagnose and repair the water heater failure.

Sears Technicians created a safe and highly-successful DIY advanced troubleshooting video to help you determine the cause of a water heating failure if you want to try to fix the problem yourself. Follow the advice in this video to find and fix the cause of the heating failure on your own:

 

The video begins with the basic troubleshooting described in the first 2 sections described above. It then goes on to guide you through checking water heater components to safely find the cause of the water heating failure.

If you get to a point in the troubleshooting where you’re not completely confident that you can safely continue, schedule a service technician to diagnose and repair the water heater.

The DIY water heater troubleshooting shown in the above video differs from the diagnosis techniques that service technicians typically use when examining a water heater to find the cause of a heating failure. Safe DIY troubleshooting doesn’t rely on live voltage checks while service technicians often use live voltage checks to quickly find the cause of water heater failures.

While many DIY’ers have been able to find the cause of water heater failures using troubleshooting advice shown in the video, some failures such as a bad circuit breaker can only be found using live voltage checks which should only be conducted by a trained service technician.

Sears Technicians have the training, tools and expertise to quickly find the cause of a water heater failure. Rely on our technicians to diagnose and repair your water heater or any other appliance in your home that quits working.

While the technician is in your home, take advantage of appliance Cleaning & Maintenance offers that the tech discusses with you. Keeping your appliances well-maintained will help them work more efficiently and last longer. Regular professional maintenance will also help prevent costly breakdowns of the appliances you depend on every day.

https://www.searshomeservices.com/blog/what-would-cause-my-electric-water-heater-to-stop-working

 

I was made aware of that article about How to Troubleshoot and Repair an Electric Water Heater from a friend on another domain. So long as you enjoyed our post kindly remember to share it. Many thanks for your time. Please come visit our site back soon.

Schedule Now